'Santec' Rubber Bale Cutters are known for precision, quality, performance & value. This machine is used for cutting raw rubber into a small rubber blocks to be plasticated. These are mainly used to cut the natural rubber, synthetic rubber & other plastic materials.

The machine is made up of knife or precision blade, hydraulic cylinder, column, base & power pack unit. The hydraulic oil supplied by the hydraulic power pack unit actuates the knife through cylinder. The rubber block under the knife is cut up. Having fulfilled one cut-off motion the knife goes up & resets automatically.

The lead or nylon is casted on the base under the knife for protecting the edge of the knife/ blade.

Technical Details for Single Cut Type Bale Cutter :

Capacity	10 Tons	15 Tons	20 Tons	25 Tons
Stroke	12''	15"	20"	24"
Blade Size	18''x8" (Height)	24"x10"	30"x10"	32"x10"
Cutting Time	12 to 15 Seconds	20 Seconds	20 Seconds	12-15 Seconds
Electric Motor	3 H.P.	5 H.P.	5 H.P.	7.5 H.P.
Weight	1.5 tons	1.5 tons	2 tons	3 tons
Roller Bed Length	18'' x 30''	24"x30"	30"x30"	32"x30"

* Custom Built Balers can also be made on request.
Technical details of 4 Cut Type Bale Cutter

Type	4 Pillars Type	4 Pillars Type
Capacity	30 Tons	60 Tons
Stroke Length	18''	18"
Blade Size	32" + 26"	44" + 40"
Type of Blade	Four Cut, '+' Shaped	Four Cut, '+' Shaped
Motor	7.5 H.P., 380/415 V, 50 Hz.	7.5 H.P., 380/415 V, 50 Hz.

* Custom Built Bale Cutters are also manufactured by Santec.